Olympia Steel Buildings Cool Metal Roofing - Energy Efficient and Sustainable
|
Cool Metal Roofing for pre-engineered steel buildings and metal building systems is a family of sustainable, energy efficient roofing products comprised of unpainted and pre-painted metal finishes. Cool metal roofing is available in a wide variety of finishes, colors, textures and profiles for both steep-slope and low-slope roofing applications. The roof can have the greatest impact on the energy use of any building, including pre-engineered steel buildings and metal building systems.
Mill-finish metal roof systems for steel buildings have very high solar reflectance but limited emittance. Metal roofs with oven-cured, pre-painted organic coatings that incorporate new "cool pigment" technology offer high total solar reflectance and high infrared emittance even with dark colors. Emissivity as high as 90% can be achieved for painted metal roofs. Energy Savings up to 40% ZEUS-SHIELD Roof Panels are available with TRINAR® COOL CHEMISTRY® Series coatings which contain ceramic infrared reflective pigments. These special pigments are designed to reflect infrared energy while still absorbing visible light energy, thus appearing as the same color yet staying much cooler. Painted metal roofs retain 95% of their initial reflectance and emittance over time. End Result TRINAR® (KYNAR 500®/HYLAR 5000®) Limited WarrantyAkzo Nobel warrants that TRINAR (KYNAR 500/HYLAR 5000) covered by this warranty will conform to the performance standards as listed below.
Cool Metal Roof Colors*
*Colors shown are matched as closely as possible. If you require an exact color match, please ask for our color card. |
![]()
|

Olympia Steel Buildings Systems
Pennsylvania • Ohio • New York • Virginia • Michigan • Florida • North Carolina • Kansas • Texas • Colorado • California • Canada • Toronto • Montreal • Alberta • Calgary
Olympia Steel Buildings Home » Standing Seam Roofs » Performance » Seam Makes Roof » Wind Load Applications » End Result » Ultraridge » Cool Metal Roofing
Standing Seam Roof Roof Performance Seam Wind Load Applications End Result UltraRidgeTM Cool Metal Roofing Roof Panel Profiles


Generally, metal roofing's "coolness" is determined by its reflectivity and emissivity. As the diagram demonstrates, when solar radiation strikes a roof surface, some of that radiation - up to 70 percent in the case of a "cool metal roof" - is reflected off the roof's surface, less heat is tranferred into the building and the building remains cooler. Therefore, a roof surface with high reflectivity as well as high emittance value, such as a "cool metal roof" will remain cooler and less heat will be transferred into the building or into ambient air than with a roof surface having low reflectivity, such as a typical asphalt shingle roof system.














