Olympia Steel Buildings ZEUS-Shield System Metal Roof Panel Profiles

The patented ZEUS-Shield Metal Roof System consists of three roof panel profiles.

1. ZS-T24 predominately for low pitch roof applications up to 3/12 pitch.
2. ZS-A16 Architectural designed series for steeper single or double sloped rectangular areas.
3. ZS-A18 Architectural designed series for steeper single or double sloped rectangular areas.

The patented ZEUS-Shield Metal Roof System has earned the following recognized certifications and listings:

• Underwriters Laboratories UL-90 Classification Construction No. 506
• Factory Mutual Class 1-90 and 1-165 Listing
• Corps of Engineers CEGS 07416 uplift Test
• ASTM E 1592 Uplift Test (three tests each span each gauge)
• ASTM E 1680 Air Infiltration
• ASTM E 1646 Water Leakage

The ZEUS-Shield Metal Roof Panel System has been tested and certified by independent testing agencies and laboratories and achieved the loads and listings shown in the Underwriters Laboratories Inc. chart below:

ASTM E 1680 Air Infiltration all seams 24" wide panels = .0005 CFM/sq.ft

ASTM E 1680 Air Infiltration all seams 16" wide panels = .005 CFM/sq.ft

ASTM E 1646 Water Leakage all seams 16", 18" & 24" wide panels = None at 12 psf

• The above tabulated loads are generated from ASTM E-1592 testing
• Design loads contain a safety factor of calculated per AISI
• COE design load contains a 1.65 safety factor per COE 07416
• Allowable wind uplift loads have not been increased by 33% as allowed by some codes when wind load controls

ZEUS-SHIELD roof system and its components are covered by US Patent numbers 5,692,352 - 5,737,894 - 6,301,853 B1 and other patents pending.

 

Olympia Steel Buildings Canada
www.olympiasteelbuildings.ca